2.2"h x 2"w Tumbler Topper with a 12mm hole (rubber gasket is included but NOT inserted)
1/8" laser cut acrylic, will come with the tape on, just peel to remove it
Price is per EACH
Acrylic Types:
*1/8" laser cut solid, matte, glitter, mirror, or specialty acrylic
*1/8" laser cut CLEAR acrylic with a pre-sublimated pattern on one side which is textured, the other side is glossy
*1/8" laser cut MIRROR acrylic with a pre-sublimated pattern on one side which is textured, the other side is black
*1/8" laser cut SMOKE & MIRRORS acrylic with a pre-sublimated pattern on BOTH sides which is textured
*1/8" laser cut GLITTER acrylic with a pre-sublimated pattern on BOTH sides which is textured
Color pictured is Rose Gold Glitter
These are designed for and will fit SNUGLY on a 9.5mm - 10mm straw. These have been tested on a Stanley The Quencher H2.0 Flowstate 40oz Tumbler, Stanley The Quencher H2.0 Flowstate 30oz Tumbler (pictured), Ozark Trail 40oz Tumbler, Simple Modern 40oz Tumbler.
Please use care when sliding the topper onto & off of the straw. The acrylic can and will break if stressed too much. The best practice is to push down or pull up in the area next to or on top of the rubber gasket right by the straw.
*****CHOKING HAZARD***** This item includes a small rubber gasket that is NOT suitable for children 5 years of age or under.
HAND WASH ONLY
The acrylic is susceptible to scratching, so please take care while peeling the masking tape, handling, and general storage